Little Bear Box
Make this cute little box is not difficult. Due to its unusual shape and original design, the box will be a wonderful decoration of the interior. In it you can store any small jewelry: rings, earrings, chains.For the manufacture we need the following materials: 1. Wooden cask stock. 2. Primer. 3. Decoupage napkin. A napkin with a bear was chosen for this master class. 4. PVA glue, scissors, pencil, sponge, brush, screwdriver. 5. Acrylic paints. 6. Lace. 7. 3D Pts. 8. Acrylic lacquer. Now you can proceed to decorating. First stage.In order to decorate the box, you need to disassemble it. Therefore, we arm ourselves with a screwdriver and unscrew all the metal fasteners so that the casket breaks up into two parts, and nothing prevents us. However, before making any decorating actions on the box, it should be primed.It is necessary to make it so that the paint better lies on the surface, and the box lasts longer. So, we take a brush and, dipping it into the ground, we coat the entire surface of the workpiece outside and inside. We give the primer to dry. Since the background of our napkin is white, it is better to paint the entire lid of the casket with white acrylic paint so that the wood does not shine through and does not spoil the napkin. After the paint has dried, proceed to cut out the napkin.The second stage.Select the appropriate image motif, turn the napkin, put the lid on it and draw it around the contour a pencil. Then cut, attach to the lid and customize, if required.Now the napkin needs to be stratified, getting rid of the two extra layers and leaving only the upper thin layer with the picture. And you can begin to apply the cloth on the cover. To the napkin lay flat, you can use plain water from the tap. Pour water into a glass, take a brush, apply a napkin to the lid and drip some water into the center. We begin to gently moisten the entire napkin, moving from the center.If in some place it falls unevenly, lift the napkin by the dry edge and lower it again, smoothing it with a wet brush. So we reach the edges of the napkin and also “glue” them with water. This method helps to avoid air bubbles and wrinkles when applied to a napkin glue.