How to sew roman blinds do it yourself

How to sew roman blinds do it yourself

How to sew roman blinds with their own hands for the kitchen and living room.

Roman curtains, as is already clear from the name, we borrowed from the ancient Romans, who, by this principle, created the sails on their ships. Since then, the production technology has hardly changed.


So, what are the Roman curtains? These are pieces of cloth, resembling waves, which are designed in such a way that they can be raised or lowered, which immediately indicates the functionality of such an element of the interior.


Thanks to prostate sewing, you canmake roman blinds your ownby handsfor living room and kitchen. And if you read the instructions and think that this is difficult, then you can always go a simple way andbuy roman blindsor executetailoring curtains to order in the shop for designer curtains.


Choosing a fabric for roman blinds



For this type of curtains, it is best to pick up and buy a stiff fabric, which is usually used for curtains. Of course, such a choice is not an axiom. You can choose other options, but the main thing is not to forget that the fabric should keep the shape of the wave. Therefore, it is better to refrain from light material or fabric with intricate patterns, becauseroman blinds on the windowswill be collected and your chosen pattern will not have the integrity of the composition.


Necessary materials for tailoring



By itself, in order toto sew Roman curtains with your own hands, one fabric is not enough. To do this, you need a whole list of materials:


  • - a wooden bar, the length of which should coincide with the length of the curtain, as well as the bar, which should be equal to the width of the Roman curtain on the windows,
  • - further it is necessary to get rejki, which length should not exceed length of a curtain, and, on the contrary, be on some centimeters less,
  • - finishing tape,
  • - a tape which in the people is simply called "flypaper",
  • - small nails, you can use and decorative,
  • - rings made of metal or plastic, which diameters will not exceed 12 mm,
  • - three cut laces of nylon, the length of one of which must be two lengths and one width of the curtains,
  • - do not forget about the fasteners for the lace.


Getting down to laying out the Roman curtains for the kitchen and living room



Cutting roman blinds photo

Cutting roman blinds. Roman curtains on the windows.

After all the necessary materials have been purchased, you can start cutting fabric.


First, measure the width of the window opening. To the data obtained, you must add another 5 centimeters, which will go to the side seams. The length of the curtains is also measured by the window opening. And here the main thing is not to forget to add 10 centimeters for allowances. It is desirable that one curtain consisted of one piece of fabric.


Next, you need to select the number of folds, which depends on the length of the curtains. The main thing is not to overdo it and make sure that the "waves" are even and look more natural. So, if the curtains are one and a half meters long, then the width of the fold can be approx. 20 centimeters. And with a length of 2 meters, the width of the curtains can be increased by 7 centimeters.


Next step mark all the important lines already on the fabric itself. Draw should, of course, on the wrong side. It is important to note all the fold lines, places where folds will form and rings are located.


The bottom fold should be half the width of the fold itself.Subsequent waves should fully display the selected long fold.


Last Steps - Build Roman Curtains



First, hem the sides. Then you can do the finishing of the timber, which is provided for fixing the curtains. To the side of the beam, to which the curtain will be fastened from above, nail the ribbon with the decorative nails. The second side of the "Velcro" sew to the top edge of the curtains.


The lower edge of the curtains should be hemmed with a double gate, the width of which should not be more than 5 cm. Such space is necessary in order to push the bar to weave the Roman curtains for windows.


From the wrong side, where the fold lines were marked, sew a finishing border that is designed to hold the slats. This will help give the "waves" a more even form. Slip metal racks in there. In the same place, it is necessary to sew and rings.


Attach the rings on top straight to the bar. This will help you create a curtain lifting mechanism. Then you can strengthen the curtain on the timber.


Then you can do fastener for the cord. Attach it to the window frame, wind the cord around it and take care of the rest of the shoelaces.Nylon threads should be brought to the upper edge of the curtains, having them from the bottom through the rings. The same procedure must be performed with all other rings. It is important that the laces come out to one side.


Subsequent actions are more or less clear. Ribbons help you to fasten folded folds. Finally, you need to align each "wave" and tie the cords with a strong knot. The knot should be tied in front of the last ring. Excess ends should be trimmed, after having passed the laces through the handle, which lifts the curtains. In total, after some simple actions, we have a Roman blinds ready, which will decorate the interior in every home.