How to connect microlab?

Andrey Kim
Andrey Kim
November 26, 2014
How to connect microlab?

Watch the video

How to connect microlab?

The Microlab 5.1 is, in essence, not just speakers, but an entire speaker system consisting of one main subwoofer speaker and five auxiliary speakers. Connecting them to a computer is not as easy as a regular pair of speakers, but it’s still easy. This article will tell you how to connect the speakers Microlab 5.1 to a PC.

We will need

To connect the speakers, we need quite a bit - the system itself and three cable types: two tulips on one side and a 3.5 mm jack on the other side. As a rule, they can be found in a box with speakers.


As we said above, we have six speakers - the main subwoofer, 2 front speakers (FrontLeft and FrontRight), 2 rear (SurroundLeft / SurroundRight) and one center (Center). These names are written on the columns, they will help you to correctly position the system. Now, in fact, proceed to connect.

  1. Turn off the computer.
  2. We find a sound card in the system unit, and on it are jack connectors - L / R front, Center and L / R surrounded - as a rule, these are green, orange and black sockets, respectively.
  3. So, we have three connectors and six speakers, which means that, as you may have guessed, we need to connect them in pairs.
  4. Take each forked “tulip” one by one and connect the speakers first in pairs, and then connect with the corresponding jack of the sound card.

That's all! The main thing - do not mess up.