Children's winter sneakers from fur
In order for the child to run warmly at home and on the street, we shoe him into light, warm, fur sneakers, half boots. You can make them with your own hands. To do this, we need: natural or artificial fur, coat fabric, felt, thread (40th number), thick nylon thread, awl, crayon, scissors, and a sharply honed knife.
Patterns are made from any used and suitable for the size of the child used shoes. We will take this product as a template. It is advisable to choose such a model so that it has fewer parts and seams. One boot or sneaker must be carefully disassembled. Separate from the sneaker soles, and its carefully disassemble for detail. Each component firmly attach to the Whatman paper and pencil circle. Cut out what you got. On each cut piece, mark, for example, the number 1. This side of the patterns will be designed for the sneaker that you disassembled (right or left).The reverse, clean, side of the pattern for a pair of sneakers. Carefully lay out the prepared patterns on your chosen fur and trace them with chalk or a pencil. Cut it out. If you chose natural fur, then cut it with a sharp knife, and if the fur is artificial, then with scissors.
Similar slave From the swipe with patterns of coral fabric. Spread coats. Put the patterns on it and, holding them with one hand, circle them and cut them. You have a ready cut for one sneaker (photo 5). The same work is done for a pair of slippers. Sewing of fur on a sewing machine or manually is done by applying one part to another (overlapped) so that in the finished product the seam is not thick and does not interfere.
When sewing the top sneaker, connection parts seam "butterfly" as well. " After the fur and the top of the product are stitched, you need to insert the stitched fur part into the stitched top and stitch them together.
Let's make a craft. It is needed to connect the sneaker to the sole. Without a crank, when sewing the sole with an awl, the coat fabric will tear. For the manufacture of the crank, leather is best suited. You need to cut strips of leather, a width of 3 centimeters, and a length equal to the length of the circumference of the stitched sneaker, plus 2 centimeters for overlap. Prepare the crane, sew it to the base of the sneaker around the entire circumference.
The next step in our work will be to hem the soles of sneaker. Felt or felt boots are suitable for the sole. Felt or insoles of large size felt can be purchased at the store for 15-20 rubles per pair. A pair of soles can be cut from the boot boot. Make a pattern for the sole on the base of the sole - circle it on a felt, insole, or on the boot of the felt boot. Cut out the sole with a sharpened knife! In this case, it will be smooth.
Now we will sew the sole to the sneaker. Before stitching on the eye mark the middle of the heel of the sole, as the sewing is to be done from heel to toe. Attach the heel of the sole to the heel of the sneaker so that the seam on the back of the sneaker coincides with your mark on the sole. Puncture the foot and the soles and begin to sew it with an awl.Sew one side of the sneaker from heel to toe. Make a knot and sew slippers on the backside of the other side of the sneaker. Slipper sewn. The final stage of our work will be bringing into the "presentation" of our product. Comb the fur on the top of the sneaker with a metal brush. Bend the upper leg to the height you like. Now the work is completed.
The pair of sneakers is done similarly. This is a universal footwear with your own hands, at minimal cost. It takes about three hours to make a pair of shoes. In such sneakers - half boots, the child will be able to run around the house, and having straightened them, down the street.