The following materials are required for the manufacture of the tree:
  • white seed beads - 85 g;
  • black seed beads - 10 g
  • gray beads - 60 g;
  • green light beads - 50 g;
  • green dark beads - 45 g
  • piece of plywood
  • metal screw;
  • artificial flowers for decoration
  • green beads for any shade, 20g
The work process begins with the manufacture of a birch trunk. On the thread with a needle dial 35 black beads and close them into the ring. String one bead and stretch the thread through the last bead of the 1st row and the first of the 2nd, string the next bead and continue the weaving in the same order. This method is called "manual weaving in a circle." For the trunk, you need to use a white matte beads as the main color, and black and gray to give the birch natural. The length of the trunk will be 120 rows, each 10th row reduced by one bead. The thread is not cut. The barrel is filled with polyethylene using a long awl.  making a birch trunk
Next, you should make thick branches.To do this, thread three white beads onto the thread and, using the “hand weaving” method, carry out the beginning of the branch, adding on both sides one by one until a row of seven beads is obtained. Close these seven beads in a ring and continue the weaving by the way "hand-weaving around in a circle". Long such a branch should be 35 rows, with each 7th row to be reduced by one bead. It is necessary to execute 13 more branches: 2 branches - 35 rows, 4 branches on 18 and 30, 3 twigs of 25 rows. The threads are not cut.
 manufacture of birch trunks
To make leaves, you need to collect three dark green and one light green beads per thread, and the same thread pass through the first of them. Get the top of the leaf. The dialed second light bead is passed through the first light one. This is the bottom of the leaf. In this way, perform the top three and bottom two leaflets. With the same thread to shape the leaves using two additional beads. The thread should be firmly tied and cut. Make another 500 leaves.
 birch leaves
After the thick branches and leaves of the birch were made, it was the turn of la thin twigs.To do this, for the remaining thread of a thick sprig, dial 35 gray beads and 1 green one and attach a leaf. Thread to hold back through one green and five gray beads. Four more gray beads and one green string are strung together, a leaf is attached, and the thread returns, a small twig is obtained. Such twigs are made every 5 beads to make thin twigs with leaves. There can be any number of such branches.
 birch leaves
The next step is to sew thick branches onto a birch trunk. To do this, you need a large needle that you need to stretch through large branches and trunk. At the top of a birch, you can make several thin branches with leaves.
 Bead Birch
 Bead Birch
For stand A piece of plywood is taken in which a hole is drilled, a 10–15 cm screw is inserted and screwed into the polyethylene so that the barrel can turn out to be slightly bent. Apply glue to the stand and sprinkle with green beads, then glue the grass.Also apply glue to the joining sites of thick branches with a trunk. Birch is ready.
 Bead Birch